Showing posts with label gun. Show all posts
Showing posts with label gun. Show all posts

Saturday, 19 January 2013

Air Arms Shamal REVIEW

The rifle is not to large but the walnut stock adds a bit of weight


 

Well it's been two weeks since my last blog so it's about time I did the promised review on my .177 Air Arms Shamal. I've mentioned bits and pieces about it in previous blogs but it's time to do a more complete review.

Looking sexy with swivel mount sling and scope

   This was Air Arms' first attempt at a PCP air rifle (Daystate brought out the first) and is a rather sexy bit of kit, although it's quite large and heavy compared to most PCP's available today. Filling it to the max 207 bar, you don't really get a levelling off of the power curve till about 30/40 shots in - this still leaves me with about 35/40 fairly consistent shots, at which point the curve rises again briefly before dropping off again.  With no pressure gauge on the rifle itself, you have to rely on the pressure gauge on the pump. So I tend to fill it to about 180 bar and i'm ready for 40 constant shots, and thats where I have my scope zeroed in to 30 yards using Air Arms Diabolo's(8.4gr). I have an old Nikko Sterling 4-12-40 silver antler scope and the image was very misty, I was scratching my brains tring to work out what the problem was and believe it or not it was just a dirty lens and there's me thinking I was going to have to invest in a new scope (numpty).
Max fill and breach

Teat shots taken with slight gusts of wind
Bolt twists and pulls back, plenty of space under the scope

   The Shamal is a single shot rifle with a slightly tapered hole in the breech to place the pellet which means I have to point the rifle down slightly otherwise the pellet just slips back out again, but now i'm used to this it's not a problem. The bolt pulls back by a knob at the rear and there's no safety on the rifle, but I have always found that the best safety is my trigger finger - I don't place it on the trigger till a shot presents itself, and with a two stage trigger which is superbly built I have no trouble reaching the second stage with its nice crisp release of the sear. I believe it's the same 'olympic trigger' you find on the 100 series - having seen an exploded view of the 100, although most of the exterior is very similar, the internals are very different, such as having a regulator and different valve design, though the hammer and spring are the same with an allen key adjustment to adjust the spring tension slightly http://guns-nn.ru/manuals/manual_airarms_njr100_en.pdf .

Olympic trigger
Bolt locked
Bolt cocked
  

Now apart from the rare flier (which is down to me) this rifle is unbelievably accurate. At 30 yards it can put 10 shots on 2 pence piece and that's with me just supporting my forearm, so with a bipod it should be quite devastating to the local bunny and woody population. However what looks like a moderator is actually a long muzzle break but is still moderately quiet, this is attached to the fill port cap and comes off as one unit by unscrewing a cover for the 1/8 fill port as no adaptor is needed on this early model (00071). Once this is removed, you can remove the muzzle break by undoing a small screw, and a custom made moderator could replace it (though the inner barrel is wider than the 10mm you find on the 400 series), The loudest sound I hear is the spring and hammer release when fired.


Muzzel break
Muzzel break and fill port cover come off in one to reveal 1/8 fill port
  

The stock is made of walnut and is sculpted with a craftsman's eye. There is chequereing on the pistol grip and along the forearm, with a raised unique comb which fits perfectly to my cheek - just as well i'm right handed as i 'm not aware of Air Arms ever doing a left handed version! The buttplate adjusts up and down  making it ideal for me to shoot comfortably and handle for quick aquisition of target (i'm sure this is a Bisley aftermarket product).

Adjustable shoulder pad

Thumb rest on stock
 

Though the gun is heavier than most, it's quiet which makes it perfect when using in a hide even though it's 45 inches long, and thank god it has a sling for those stalking moments in the winter months. This rifle is not everyone's cup of tea but I love it, you know you've got a piece of kit in your hands that will last for generations to come, just like my Weihrauch HW35 Luxus.

Taking advantage of a still winters day shooting

 
This rifle is brimming with character and that is what I look for in a rifle. The good points far outweigh any little niggles I have come across  - in fact I find them quite endearing.


 Taking that 30 yard shot
   TTFN

   Wing Commander Sir Nigel Tetlington-Smythe O.B.E

  

  

Thursday, 29 November 2012

The workshed and the art of trying to complete one project at a time.

The stuff you can learn on you tube nowadays is amazing. I wanted a forge to cast aluminium and thanks to a blog by 'MYFORDBOY' I was able to make just that. I needed a simple metal lathe and with a bit of googling i'm well on my way to coming up with something well useable though not precision made, but the tolerances are fine for now. With what I have now i could buid a very fine 'gingery lathe'. 'THE VINTAGE PROJECT' and 'THE BACKYARD  METAL CASTING BLOG' are perfect for this.

So now down to my air rifles. There's the 22 Wiehrauch hw 35 which only needs an inspection and a lube really, seeing as its shooting one inch groups at 30 yards and the woodwork is uttererly unique with immaculate blueing.



I bought two Crosmans a while back. The pistol, a 2044, is one the best pistols you can get for your money. It comes with many after market parts. The other is the Air Source 1077 which is a repeater based upon the Ruger 1022 firearm, this little beaut is hours of fun but can be exspensive in co2 depending on how carried away you get with it, and with it being a cold November morning the power drops like Shelley Winters off a cliff edge. I did have an idea once to change the barrels in the 1077 from a 177 to a 22, but we shall wait and see on that one, shall we?




The BSA Meteor  I picked up for a small price was coated in loads of black paint, wouldn't fire a pellet as you could hear piston creep down the action , no breach seal, and no rear sight, and because its a mk111 its impossible to fit a scope mount at this time. A good stripdown, replacing the disintegrated leather spacer on the piston and turning a new breach seal (the O ring seemed fine), turps, wet and dry, and wirewool soon got the piston bore all smooth and shiny. Stripped the piant off the gun and got it looking spiffing and shooting fine, most definitely a project for more affluent times, I save a lot of money making my own parts.





Now the project I think deserves the most attention for now is the sad tale of the 22 Relum Telly I found in a skip many moons ago. The poor thing just lay there with a shattered stock and a slightly bent barrel a sure sign that the barrel had snapped shut prematurely. I plan to build a new stock for it - I have some lovely wood for this project and am quite eager to be getting on with it as soon as i'm over this stinking flu.

  

Friday, 23 November 2012

SO WHAT IS 'THE ANGRY, ANGRY GUN COMPANY'?

   The name came about from a suggestion made by my wife a short while back, and to tell you the truth I found it ironically amusing, so there it stayed. Airguns are a passion of mine as they are to many others young and old, whether they're used for plinking, hunting, field target, or HFT, even those who take it to the discipline of Olympic level.

I have several projects sitting around and I am keen to be getting on with them. I will document thier progress as well as the progess on tools and machinery such as gingery slyle lathe and metal smelting furnace to help me do a more professional job upon them. More than anything this will be a learning experience for me, and through  trial and error will be able to help others along the way, and hopefully learn from others myself. I have found you tube and google in general a great wealth of information.

One the major reasons for this blog is to find likeminded people in Cirencester  and surrounding area who are at a loss for somewhere to practice for HFT and FT without having to pay through the nose for the privilege.

So there will be documented projects to follow and possible recipes on pigeon pie, yum yum.

TTFN, Tet